RS Pro RS-218 Manual De Instrucciones página 2

Pocket Multimeter with NCV Tester/ English
1. Warnings
1. Read, understand and follow Safety Rules and Operating Instructions in this manual
before using this meter.
2. The meter's safety features may not protect the user if not used in accordance with
the manufacturer's instructions.
3. Keep fingers away from the metal probe tips when taking measurements.
4. Before changing functions using the selector switch, always disconnect the test leads
from the circuit under test.
5. Comply with all applicable safety codes. Use approved personal protective equipment
when working near live electrical circuits-particularly with regard to arc-flash potential.
6. Use caution on live circuits. Voltages above 30V AC rms, 42V AC peak, or 60V DC pose
a shock hazard.
7. Do not use if the meter or test leads appear damaged.
8. Verify operation before using meter by measuring a known live voltage.
9. Do not use the meter in wet or damp environments or during electrical storms.
10.Do not use the meter or near explosive vapors, dust or gasses.
11. Do not use the meter if it operates incorrectly. Protection may be compromised.
12.Do not operate meter while Low Battery warning is on. Replace batteries immediately.
13.Do not apply voltage or current that exceeds the meter's maximum rated input limits.
2-International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to
the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous
voltages may be present.
Double insulation
02/12/2017 Version No. 001
1