Hedge Trimmer Safety Warnings - GreenWorks Tools 2201207 Manual De Utilización

EN
DE
FR DE ES
FR EN ES
battery packs. Use of any other battery packs may
create a risk of injury and fire.
„ When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or fire.
„ Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help. Liquid
ejected from the battery may cause irritation or burns.
serviCe
„ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.

HeDGe triMMer safetY WarninGs

„ Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material.A moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
„ Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the hedge
trimmer always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
„ Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
reaD all instruCtions Before operatinG
„ Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
„ Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
„ Inspect the unit before use. Replace damaged parts.
Check for battery pack leaks.
„ Make sure all fasteners and guards are in place and
secure. Replace cutting blades or any other parts
that are cracked, chipped, or damaged. Make sure
the cutting blade is properly installed and securely
fastened. Failure to do so can result in personal injury
to the operator and bystanders, as well as damage to
the unit.
„ Use the right tool. Only use this hedge trimmer for the
purpose intended.
IT PT NL SV DA NO
IT PT NL SV DA NO
English (Original instructions)
FI HU CS RU RO PL
FI HU CS RU RO PL
„ Do not use hedge trimmer if switch will not turn the
unit on or off. A unit that cannot be controlled with the
switch is dangerous and must be repaired.
„ Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
„ Clear the area of children, bystanders, and pets. At
a minimum, keep all children, bystanders and pets
outside a 15 m radius; there still may be a risk to
bystanders from thrown objects. If you are approached,
stop the unit immediately.
„ Do not operate power tools in explosive atmospheres,
such as in the presence of fl ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
„ To avoid the risk of electric shock, do not operate unit
in damp or wet locations.
„ Do not handle the unit with wet hands.
„ Do not allow children or untrained individuals to use
this hedge trimmer.
„ To reduce the risk of injury, always wear full eye
protection, footwear, goggles and clothing when using
this machine.
„ Wear a face or dust mask if the operation is dusty.
„ Dress properly. Do not wear loose clothing or jewellery;
they can be caught in moving parts. Use of rubber
gloves, substantial footwear and long trousers is
recommended when working outdoors.
„ To prevent hair from being drawn into nearby air
vents and becoming entangled in moving parts, wear
protective hair covering to contain long hair or secure
covered hair above shoulder level.
„ When transporting or storing the machine always fit
with blade cover.
„ Always be aware of your surroundings and stay alert
for possible hazards that you may not hear due to the
noise of the machine.
„ Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before
turning it on.
„ Always ensure all the handles and guards are fitted
when using the tool.
„ Never attempt to use an incomplete machine or one
fitted whith an unauthorised modification.
„ The vibration level during actual use of the power tool
can differ from the declared total value depending on
the ways in which the tool is used.
„ It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
10
SL HR ET LT LV SK BG
SL HR ET LT LV SK BG