Maintenance And Repair; Blade Care; Hedge Trimmer Lubrication - GreenWorks Tools 2201207 Manual De Utilización

EN
DE
FR DE ES
FR EN ES
If blade jams on any electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY
LIVE AND VERY DANGEROUS. Continue to hold the
hedge trimmer by the insulated rear handle or lay it
down and away from you in a safe manner. Disconnect
the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure
to heed this warning will result in serious personal injury
or possible death.
Clear the area to be cut before each use. Re-move all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade and create a risk
of serious personal injury.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, oil,grease, etc.
When servicing use only identical Greenworks Tools
replacement parts. Use of any other parts can create a
hazard or cause product damage.
Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that may
damage, weaken, or destroy plastics.

MaintenanCe anD repair

BlaDe MaintenanCe – HeDGe triMMer
Battery units do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
To prevent serious personal injury, always remove
the battery and take extra precautions and care when
performing maintenance, service or for changing the
cutting blade.
IT PT NL SV DA NO
IT PT NL SV DA NO
English (Original instructions)
DanGer
WarninG
WarninG
Caution
WarninG
FI HU CS RU RO PL
FI HU CS RU RO PL
To prevent serious personal injury, remove the battery
pack before servicing, cleaning, or removing material
from the unit.

BlaDe Care

„ Lubricate the cutting blades after each use.
„ Periodically inspect the blades for damage and wear.
„ Always use the manufacturer's specified replacement
blades.
to luBriCate BlaDe See figure 6.
„ Remove battery pack from hedge trimmer.
„ For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use. Before
lubricating, remove the battery pack and lay hedge
trimmer on a flat surface. Apply light weight machine oil
along the edge of the top blade.
„ Occasionally, you should oil your hedge trimmer during
prolonged use. Before oiling, stop hedge trimmer,
remove battery pack, then oil. You then can resume
trimming. Do not oil while hedge trimmer is running.

HeDGe triMMer luBriCation

„ All of the bearings in this tool are lubricated with a
sufficient amount of high-grade lubricant for the life of
the unit under normal operating procedures. Therefore,
no further lubrication is required.
Do not attempt to modify this unit or create or mount any
accessory not specifically recommended in this manual
for use with this hedge trimmer. Any such alteration or
modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
Examine hedge trimmer frequently to assure all parts
are unbroken and securely attached. Make sure all
screws and fasteners are securely tightened to prevent
the risk of serious personal injury.
15
SL HR ET LT LV SK BG
SL HR ET LT LV SK BG
WarninG
WarninG
WarninG