Legal Notice; Fcc Statement - Marshall ACTON II Manual Del Usuario

LEGAL NOTICE

Design of device and packaging are intellectual proper-
ties of Zound Industries International AB and Marshall
Amplification Plc. © All Rights Reserved. Zound
Industries International AB is hereinafter referred to as
"Zound Industries" or "manufacturer".
MARSHALL, Marshall Amps, their respective logos,
"Marshall" and "Marshall" trade dress are trademarks
and intellectual property of Marshall Amplification Plc
and may not be used without permission. Permission
granted to Zound Industries.
Qualcomm aptX is a product of Qualcomm Technol-
ogies International, Ltd. Qualcomm is a trademark
of Qualcomm Incorporated, registered in the United
States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and
other countries, used with permission.
The Bluetooth® wordmark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Zound Industries is under license.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is
a service mark of Apple Inc., registered in the U.S. and
other countries.
Google Play and the Google Play logo are trademarks
of Google LLC.
All other trademarks are the property of their respective
owners and may not be used without permission.
For more legal information related to this product and
to its use in your specific region, and for more detailed
information about Zound Industries and partner &
license information, please visit the website: www.
marshallheadphones.com. The user is recommended
to visit the website regularly for up-to-date information.
Zound Industries International AB, Centralplan 15,
111 20 Stockholm, Sweden
CAUTION / AVIS
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of non-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Le symbole représentant un éclair avec une flèche dans
un triangle équilatéral a pour but d'avertir l'utilisateur
de la présence de « tension dangereuse » non-isolée
à l'intérieur du produit qui peut être suffisamment
importante pour constituer un risque d'électrocution.
Warning: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-service-
able parts inside. Refer servicing to qualified personnel.
004
Avertissement : Afin de réduire le risque d'électrocu-
tion, ne pas retirer la protection (ou le panneau arrière),
car aucune pièce intérieure ne peut être réparée par
l'utilisateur. Confier toute réparation à un professionnel
qualifié.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the appliance.
Le point d'exclamation contenu dans un triangle équi-
latéral, avertit l'utilisateur que la documentation fournie
avec l'appareil contient des instructions d'utilisation et
d'entretien importantes.

FCC STATEMENT

Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environ-
ment. This device must not be co-located or operating
in conjunction with any other antenna or transmitter.
To comply with FCC's RF radiation exposure limits for
general population/uncontrolled exposure, this device
must be installed to provide a separation distance of at
least 20 cm from all persons.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency ener-
gy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.