English; Important Safety Instructions; Installation & Connection; Declaration Of Conformity - Marshall ACTON II Manual Del Usuario

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manu-
facturer, or sold with the apparatus. When
a cart or rack is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
• Keep the product and its accessories away from
young children. This is not a toy.
• Do not install the product in an area that impedes
access to the power plug. Disconnecting the power
plug is the only way to completely remove power
to the product and the power plug must be readily
accessible at all times.
• To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or
splashing and that objects filled with liquids, such
as vases, shall not be placed on apparatus.
• Do not drop the product.
• Do not cover the product to avoid risk of
overheating.
• Do not listen too close to the product.
• Do not listen for an extended period of time at a
high sound pressure level.
• Do not insert body parts or objects into the bass
port for risk of injury.
• The mains plug is used as disconnect device, the
disconnect device shall remain readily operable.
This equipment is a Class II or double
insulated electrical appliance. It has been de-
signed in such a way that it does not require
a safety connection to electrical earth.
006
INSTALLATION & CONNECTION
• Connect the product only to the correct mains
voltage as shown on the equipment.
• Use only power cables of the type specified in the
operating instructions or as marked on the product.
• Do not install this equipment in a confined or
building-in space, and remain a well ventilation con-
ditions at open site. The ventilation should not be
impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
• No naked flame sources, such as lighted candles,
should be placed on the apparatus.
DISPOSAL & RECYCLING INFORMATION
The crossed-out wheeled bin symbol on
your product (and any included batteries and
other electronic accessories) indicates that
they should not be disposed of as normal
household rubbish. Do not dispose of your
product, batteries and electronic accessories
as unsorted municipal waste. Your product,
batteries and electronic accessories should
be handed over to a certified collection point
for recycling or proper disposal at the end
of their life.
For more information related to disposal and recycling,
visit the website: www.marshallheadphones.com
DISCLAIMER
For use with mobile devices using 3.5 mm plug
unprotected two-way standard.

DECLARATION OF CONFORMITY

Hereby, Zound Industries International AB, declares
that this product is in compliance with 2014/53/EU.
For the declaration of conformity, please visit the
following website: www.marshallheadphones.com/doc
Designed in Stockholm • Produced in China