Thorough Cleaning - Philips 9000 Serie Manual Del Usuario

24
English

Thorough cleaning

1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap (Fig. ).
3 Switch off the shaver. Pull the shaving head
holder off the bottom part of the shaving unit
(Fig. ).
4 Rinse the hair chamber under the tap (Fig. ).
5 Rinse the shaving head holder under a warm
tap (Fig. ).
6 Carefully shake off excess water and let the
shaving head holder air-dry completely.
7 Attach the shaving head holder to the bottom
part of the shaving unit ('click') (Fig. ).
We advise you to clean the shaving heads
thoroughly once a month or when the appliance
does not shave as well as it used to.
Note: The shaving heads are locked by a blue (Fig.
) or an orange (Fig. ) retaining ring. Follow the
correct instructions.
1 Switch off the appliance.
2 Pull the shaving head holder off the bottom
part of the shaving unit (Fig. ).
3 Rinse the hair chamber and shaving head
holder under the tap.
4 Turn the retaining ring anticlockwise and lift it
off the shaving head (Fig. ).
Repeat this process for the other retaining rings.
Place them aside in a safe place.
5 Remove the shaving heads from the shaving
head holder (Fig. ). Each shaving head consists
of a cutter and guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally put a cutter in the wrong