Philips 9000 Serie Manual Del Usuario página 25

shaving guard, it may take several weeks before
optimal shaving performance is restored.
6 Clean the cutter and guard under the tap (Fig. ).
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
holder (Fig. Fig. ).
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
10 Blue retaining ring: Place the retaining ring on
the shaving head and turn it clockwise to
reattach the retaining ring.
Place the arrows on the ring in line with the
projections in the shaving head holder (Fig. ).
Turn the ring clockwise until it clicks to indicate
that the ring is fixed (Fig. ).
- Orange retaining ring: Place the retaining ring
on the shaving head and turn it clockwise to
reattach the retaining ring (Fig. ). Repeat this
process for the other retaining rings.
Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings (Fig. ). Do not place
the shaving head holder on a surface when you
do this, as this may cause damage.
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed (Fig. ).
11 Attach the shaving head holder to the bottom
part of the shaving unit ('click') (Fig. ).
25
English