Cleaning The Shaver Under The Tap - Philips 9000 Serie Manual Del Usuario

Cleaning the shaver under the tap

Replacing the cartridge of the SmartClean
system
Replace the cleaning cartridge when the
replacement symbol flashes orange or when you
are no longer satisfied with the cleaning result. If
you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge lasts
approximately three months.
1 While holding the SmartClean system with one
hand, press the button on the side of the
SmartClean system and lift the top part of the
SmartClean system.
2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning fluid (Fig. ).
You can safely pour the cleaning fluid down the
sink.
3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull off
the seal (Fig. ).
5 Place the cleaning cartridge in the SmartClean
system (Fig. ).
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click') (Fig. ).
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
23
English