Charging In The Smartclean System (Specific Types Only); Using The Appliance; Switching The Appliance On And Off - Philips 9000 Serie Manual Del Usuario

Charging in the SmartClean system (specific types
only)

Using the appliance

Switching the appliance on and off

Shaving
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press the top cap to be able to place the shaver
in the holder ('click') (Fig. ).
4 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system holder (Fig. ).
5 Place the shaver in the holder, tilt the shaver
backwards and press down the top cap to
connect the shaver ('click') (Fig. ).
Note: The battery symbol starts to flash to indicate
that the appliance is charging. When the battery is
fully charged, the battery symbol lights up
continuously.
Note: This appliance can only be used without
cord.
- To switch on the appliance, press the on/off
button once (Fig. ).
The display lights up for a few seconds.
- To switch off the appliance, press the on/off
button once.
The display lights up for a few seconds and
shows the remaining battery charge.
Skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
15
English