geberit MFP 2 Manual De Operación página 26

EN
Pressing with Geberit
pressing attachments
WARNING
Risk of injury caused by flying
fragments
▶ Wear protective goggles and a
WARNING
Risk of injury caused by the use
of incorrect pressing
attachments
▶ Only use pressing
To improve ease of use, the pressing
head of the pressing tool can be
turned to any position up to 180°
before pressing. The pressing head
can only be rotated before the
pressing procedure.
26
protective helmet.
attachments that correspond
to the diameter of the
pressfittings to be processed.
Prerequisite
– Pipe ends are deburred and clean.
– The pipe section and pressfitting are
fitted together according to the
installation manual of the piping system.
– The pressing attachment is inserted
correctly.
– The hydraulic valve of the pressing tool
is open and the handle has been pushed
backwards.
1
Fit the pressing attachment to the
pressfitting correctly and do not tilt.
→ See user manual for the pressing
attachments in question.
CAUTION
Danger of crushing
▶ Keep hands away from the
pressing attachment.
27021600880296075-1 © 02-2018
968.243.00.0 (00)