INSTRUCTIONS FOR USE
3
Equipment Setup and Use:
3.1 Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.
3.2 Setup:
a. The Urocatcher is equipped with low profile mount clamps which will not
interfere with table sockets during positioning of legholders.
b. To install, orient the frame assembly with the flexible band in its lowest position.
Loosen the thumbscrews and push the mount clamps onto the ends of the
accessory rails. If access to the ends of the rails is blocked, the clamps can be
clipped on over the rail and then positioned adjacent to the edge of the table.
Tighten the thumbscrews.
c. Place the disposable drainage bag on the frame assembly with the skirt on the
outside of the flexible band and the drainage funnel inside.
Document Number: 80028225
Version: B
Page 12
Issue Date: 24 MAR 2020
Ref Blank Template: 80025118 Ver. E