INSTRUCTIONS FOR USE
3
Equipment Setup and Use:
3.1 Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.
3.2 Setup:
1. Thread one end of the Strap through one of the
Hooks. Lift up on Cam Buckle and thread the
free end of the Strap through. Note the
orientation of the Clip to the Buckle. This
orientation is the same on both ends. Repeat for
the other end of the Strap.
2. Clip the Hook under the Accessory Rail.
3. Secure the Hook by sliding the Lock Plate over
the top of the Accessory Rail.
4. Confirm that the Lock Plate and Hook is
securely attached to the Accessory Rail.
5. Adjust strap tension as previously described.
Document Number: 80028236
Version: B
Page 12
Issue Date: 30 MAR 2020
Ref Blank Template: 80025118 Ver. E