arjo Enterprise ENT-ACC10 Instrucciones De Uso página 3

Model ENT-ACC10 consists of a series of bars and clamps that can be assembled in
several configurations. Once installed at the foot end of the bed, it can be adapted and
adjusted to allow different types of traction to be applied. This accessory is suitable for
use with Arjo Enterprise® (5000, 5000X, 8000, 8000X, 9000, 9000X), Citadel and Citadel
Plus.
Refer to the bed instructions for use to confirm compatibility before using this
accessory
Traction should only be applied by clinically qualified persons
If a serious incident occurs in relation to this medical device, affecting the user, or
the patient then the user or patient should report the serious incident to the
medical device manufacturer or the distributor. In the European Union, the user
should also report the serious incident to the Competent Authority in the member
state where they are located.
The small traction assembly comprises the following components, as shown in the
diagram below:
Ref. Description
A Upright bar
B Double screw clamp
C Crossbar
D Straight bar with clamp
E Protective foam ball
F Clamp with pulley
WARNING
Arjo part no.
818.516 4655003695
818.514 4655000261
818.517 4655003687
818.511 4655000766
818.513 4635001304
818.512 4655000617
1
Kinetec
Qty.
part no.
2
2
1
1
2
2
Weight
0.6kg
0.5kg
0.7kg
0.9kg
<0.1kg
0.1kg