Guarantee Information - Be Cool ultimate Manual Del Usuario

EN
9. CANOPY INSTALLATION AND OPERATION
Align the canopy buckle with the fixed washer,press the
two inner sides of the frame synchronously to assemble the
canopy, 9
Simultaneously pull out the fixed buckle to remove the canpy,
9.a.
The front canopy can be unfolded with one hand operation (4
stages to adjust the appropriate position of canopy), 9.b
10. CANOPY GLUE OPERATION
After assembling the canopy, pull the zipper head up to close it
and pull the zipper down to unfold the second section, .10.
After the middle zipper of the canopy is pulled open, the third
section of the canopy can be adjusted forward and backward,
10.a.
Fasten back glue of the canopy to the sides of the seat cloth to
complete the canopy assembly, 10.b
11. FRONT BAR ASSEMBLY OPERATION
Hold the front bar in both hands, press the buttons (fast
release button) and pull out to remove it, 11 / 11.a
Hold the front bar with both hands and insert it, hear "click" to
finish installation, 11.b
20
MAINTENANCE
Do not expose the upholstery material to the sun during long
periods. Wash plastic parts with warm water and soap, then dry
all components thoroughly. Regularly check the brakes, harnesses
and fastening elements that may suffer wear and tear through
use.

GUARANTEE INFORMATION

This article comes with guarantee in accordance with Royal
Legislative Decree 1 / 2015 of 24 July.
Keep your receipt as proof of purchase, you need to show it at the
store where you purchased the product to prove validity in the
event of any type of claim.
This guarantee does not cover any faults or breakages caused
by misuse of the article or by not following the safety and
maintenance information listed in the instructions and on the
care labels.