Installation And Use - arjo Enterprise ENT-ACC65 Instrucciones De Uso

Model ENT-ACC65 IV fluid bag holder can be attached to a lifting pole to provide
support for IV equipment. It is suitable for use with Arjo lifting poles, models ENT-
ACC01 and ENT-ACC03.

Installation and use

Partially undo the clamp screw (1) and slide the holder over the end of lifting pole (3).
Position the IV bag holder over either of the pegs (2) on the horizontal part of the
lifting pole (3). Make sure the clamp screw (1) is located centrally above the peg (2).
Tighten the clamp screw (1) to prevent movement. Attach IV equipment to the hooks.
1
2
3
4
2
1
3
WARNING
This accessory must be securely fixed to the lifting pole centrally on a peg
before attaching IV equipment to the hooks.
Do not attempt to reposition or unclip the hooks (4).
Do not exceed the safe working load of 3kg per hook.
If a serious incident occurs in relation to this medical device, affecting the user,
or the patient then the user or patient should report the serious incident to the
medical device manufacturer or the distributor. In the European Union, the user
should also report the serious incident to the Competent Authority in the
member state where they are located.