ProMed 520 Manual Del Usuario página 21

Information about suitable disinfectants and products can be
obtained from Promed.
For disinfection of instruments and grinding heads:
Promed Pure ID (Product No. 330810)
For disinfection of surfaces and devices:
Promed Pure FD (Product No. 330815)
For disinfection and cleaning of instruments and grinding heads:
Promed UC-50 (Product No. 330210)
o
PeratinG tHe unit
Before you switch the unit on, you must set the rotating
speed (rotary knob (E)) to zero.
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
wall socket.
A. Before using the unit, check that the voltage specified on the
unit matches that of the local mains supply. Then plug the
other end of the lead into the designated socket "A" on the
rear side of the unit and the mains lead into the mains outlet.
B. Connect the hand unit plug to socket "B" on the front side of
the unit.
C. Select a suitable grinding head. Insert the grinding head into
the grinding head holder (C) at the front of the handpiece.
The mechanism locks automatically as soon as the grinding
head starts to rotate. Never use force to remove or insert
a grinding head! Grinding heads with a shaft diameter of
2.332 mm to 2.350 mm (0.091 to 0.093 inches) fit exactly
DE
US
FR
IT
ES
NL
RU
PL
SE
FI