Location Requirements - Haier ESAQ406P Guía De Uso Y Cuidado

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
conditioner, for models: ESAQ406P ESAQ408P
NOTE:
Free movement of air in the room to be cooled.
A large enough window opening for the air conditioner. See ig.
The air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers. See ig.
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements:
A. Width
B. Height
PAGE 6
ESAQ406P & ESAQ408P
26-1/16" - 39-1/4"
13-3/8"
INSTALLATION REQUIREMENTS
Fig. 2
AIR DISCHARGE
B-HEIGHT
A-WIDTH