Operation - Evolution EVO-SYSTEM 1000L Manual De Instrucciones

®
Fig 9
Fig 10
Fig 11
212
• Holding onto a convenient part of the external engine
frame can aid the operator achieving and maintaining
alignment when connecting an accessory.
• Gently push the accessory into the engine. Keep the 3
locating pins and the two stabilising pins aligned with their
respective docking positions. The internal coupling
between the engine and the accessory will be made
automatically. No component alignment or adjustments
are necessary.
• Be gentle and patient, the coupling is precisely engineered
and no great force is required to connect the accessories.
Once the operator has mastered the 'technique',
accessory connection will become straight forward.
• Firmly push the engine and accessory together until the
'click' of docking is heard. The Uni-coupling release lever
(Fig. 10) will return to its neutral position.
6. Disconnecting an accessory
Note: Before attempting to remove any accessory ensure
that the engine is switched off, stationary and cold. Some
components (e.g. the exhaust system) can remain very hot for
a considerable time after the engine is switched off, and there
is a burn risk for the unwary user.
• Ensure that the engine is on a clean, stable and horizontal
surface.
• Allow the engine and the attached accessory to fully cool
down from their working temperatures.
• Hold the accessory at a convenient point on its external
frame.
• Operate the 'Uni-coupling' release lever with one hand
(Fig. 10) whilst gently easing the accessory outwards
releasing it from the coupling with the other hand.
• Using both hands gently pull the accessory from the engine.
The accessory may be heavy (e.g. the generator) so enlist
competent help with accessory removal if necessary .
• Store the accessory carefully in a secure location for future
use. Refit the coupling protection cover.

OPERATION

Note: The EVO-SYSTEM Engine cannot be operated without
an accessory being connected. Some components will
become very hot during operation (e.g. the exhaust system
and surrounding components). The operator should employ
due diligence and care when using this machine.
• Position the engine on firm level ground and lock the
transportation wheels by operating the wheel brake.
• Deploy the Accessory Mounting Frame to the fully
down position.
• Connect the required accessory.
• Check the oil level and fuel levels.
www.evolutionpowertools.com