Evolution EVO-SYSTEM 1000L Manual De Instrucciones página 219

MAINTENANCE SUMMARY CHART
ITEM COMMENTS
Visually
All fuel lines & unions
All Electrical Leads
Check
Check condition
Spark
Clean & adjust gap
Plug
Replace if necessary
Check Oil Level
Engine
Oil*
Change / Replace Oil
Air
Replace if necessary
Filter
Fuel
Filter
Replace if necessary
Recoil
Ensure ventilation slots
Starting
are unobstructed
System
Uni-coupling
Spray (with Silicone
Lubricant)
Rubber
Coupling
Visual Check
Check/
Replacement
*Replacement engine oil is available from Evolution or use a high quality 10W40 mineral oil.
DAILY
Clean
Clean
Clean
After every 25 hours of use lightly spray
through the 3 locating pin connection points.
After every 250 hours of use* - replace if worn or damaged.
This procedure needs to be carried out carefully
and a seperate instruction sheet is available from
www.evolutionpowertools.co.uk/uk/evo-system_downloads.html.
If you do not feel confident, please contact our
* Evolution's internal test data.
www.evolutionpowertools.com
1 MONTH 3 MONTH
( or 20 hours) ( or 50 hours)
After 1st
MONTH
helpline for further help and advice.
CZ
®
DA
6 MONTH
DE
( or 100 hours)
EL
ES
FI
FR
GB
IT
NL
NO
PL
PT
RU
SK
SV
219