General Cleaning And Maintenance - Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación

Remove the bulb protection, located under the dashboard,
unscrewing the screw.
Replace the burnt bulb with a new one,
paying attention to the features shown on
the plate.
Replace the bulb protection by screwing on the screw.
MAINTENANCE ELECTRIC BOARD
WARNING: Before proceeding with any
operation, disconnect the power supply
from the appliance.
Remove the screw under the dashboard.
Unhook the dashboard by pulling it towards
you.
In model. "Ice cream – Pastry & Bakery – Roll-In" rotate the
instrument panel on the side heads.
Disconnect all the connections present.
Proceed to the intervention.
At the end of the operation, hook up all the connections, making sure to follow the
instructions on the rating plate and reassemble the dashboard on the appliance.

GENERAL CLEANING AND MAINTENANCE

For a constant efficiency of the refrigerator it is recommended to perform the cleaning and
mantainance operations.
Before to begin with the operations proceed as following:
− set the general cut-out in OFF position
− remove the plug from the socket and wait till the
complete defrosting of the refrigerator.
13