Keyboard Lock - Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación

You can leave the programming phase by waiting for 30 seconds without operating on the
card,or pressing
In both cases, there you will hear 3 consecutive, short beeps and the display will
temporarily show [ESC].
Hold the key menu pressed for over 3 seconds to gain access to the
quick-access function.
The display shows the first smart function option.
It blinks at high frequency.
Use the up and down keys to display the function [F_C / F_ _]
(F_C → 75% / F_ _ → 90%)
Press the key on/sby/enter to confirm your selection and activate/de-
activate the function.
You can leave the programming phase by waiting for 30 seconds without operating on the
card, or pressing
In both cases, there you will hear 3 consecutive, short beeps and the display will
temporarily show [ESC].
Hold the key menu pressed for over 3 seconds to gain access to the
quick-access function.
The display shows the first smart function option.
It blinks at high frequency.
Use the up and down keys to display the function [Loc].
Press the key on/sby/enter to confirm your selection and activate/de-
activate the function.
Press the keys
keyboard.
You can leave the programming phase by waiting for 30 seconds without operating on the
card, or pressing
In both cases, there you will hear 3 consecutive, short beeps and the display will
temporarily show [ESC].
for 5 seconds.
ROOM FAN OPERATION
for 5 seconds.

KEYBOARD LOCK

for 5 seconds.
simultaneously for over 5 seconds to unlock the
21