Usage Interruptions; Malfunctioning - Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación

In case of longer inactivity of the refrigerator and for maintaining it in the best state act as
following:
− set the general cut-out in OFF position.
− remove the plug from the socket.
− empty the refrigerator and clean it as described In the chapter
"CLEANING".
− let the doors open to avold the forming of bad smell.
− cover compressor set with a nylon sheet to protect it
from dust.
Malfunctioning during operation is often due to banal causes , whitch may nearly all be
resolved without the help of a specialised technician. Consequently, before getting in touch
with a service centre, check the following:
PROBLEM
The appliance does not
start
The internal temperature is
too high
The appliance is
excessively noisy
There are unpleasant
smells inside the
refrigerator
Some condensation is
produced on the appliance
Bulb not operational
Upon completion of the above checks, if the fault persists, contact an authorised service
centre. Always indicate:
• the nature of the fault

USAGE INTERRUPTIONS

MALFUNCTIONING

POSSIBLE CAUSES
Check that the plug is properly inserted into the socket.
Check that there is voltage at the socket
Check the electronic card adjustment
Check for a heat source in the vicinity
Check that the door closes properly
Check that the appliance is standing level. A lopsided
appliance could set off vibrations
Check that the appliance is not touching other appliances or
parts which could resonate
There are foodstuffs with a particularly strong smell (for
example cheese and melon), placed in non-sealed containers
Internal surfaces must be cleaned
Room humidity is very high
Doors are not well-closed
Replace the bulb by interrupting the power supply of the
appliance
34