Playing back the voice
memo
1
Press (PLAY) on the rotary commander.
The playback starts from MEMO 1.
VOICE
2
Select the desired voice memo using the
SEEK/AMS control.
VOICE
3
Adjust the volume on the main unit or
by using the rotary commander.
The unit automatically returns to the
previous source after playing back all of the
voice memos.
To interrupt the playback of a voice
memo
Press (PLAY) on the rotary commander.
Playback stops and the unit automatically
returns to the previous source.
Erasing the voice memo
1
Play back the voice memo to be erased.
2
Press and hold (PLAY) on the rotary
commander until a beep sound is heard.
The voice memo will be erased and the
numbers of succeeding voice memos will
move up respectively.
Erasing
"MEMO 3"
"MEMO 4" moves up
to "MEMO 3."
Other Functions
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control an optional CD or MD unit
with the rotary commander.
By pressing buttons (the SOURCE
and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TAPE n TUNER n CD n MD
Pressing (MODE) changes the operation
in the following ways;
• Tape playback direction
• Tuner :
FM1 n FM2 n MW n LW
• CD unit : CD1 n CD2 n ...
• MD unit : MD1 n MD2 n ...
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
EN
(MODE)
21