Creating A Programme; Programme Memory - Sony XR-C9100R Manual De Instrucciones

Creating a programme

— Programme Memory (CD/MD unit with
the programme memory function)
You can play tracks in any order of your choice
by creating and storing programs in the unit's
memory. You can make two programmes:
Programme 1 and Programme 2. You can
select up to 12 tracks for each programme. You
can store the programmes in memory.
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
Programme edit mode
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Select the track you want.
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly to select the
unit.
3 Press (SHIFT), then press the number
button to select the disc.
4 Press (SHIFT).
5 Push the SEEK/AMS control up or
down to select the track.
3
Press (6) (ENTER) momentarily.
PLAY MODE ENTER
µ
DISC TRACK
PLAY MODE ENTER
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering the tracks,
press (4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "**Wait**" appears in the display while the unit
is reading the data, or if a disc has not been put
into the unit.
• "*Mem Full*" appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
You can select:
•PGM 1 – to play Programme 1.
•PGM 2 – to play Programme 2.
•PGM 1+2 – to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (n) repeatedly until the
desired programme appears.
Programme 1 playback
PGM 1
PLAY MODE
µ
Programme 2 playback
PGM 2
PLAY MODE
µ
Programmes 1 and 2 playback
PGM 1+2
PLAY MODE
µ
Normal playback
PLAY MODE
Programme Play starts.
continue to next page n
EN
27