2
Press (SHIFT).
SET UP
The clock starts.
3
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the
unit is set to the B position, turn the power on
first, then set the clock.
EN
8
Cassette Player
Listening to a tape
1
Press (OPEN) and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, press
(SOURCE) repeatedly until "FWD" or "REV"
appears to start playback.
The side facing up is being playback.
The side facing down is being playback.
Tips
• To change the tape's playback direction, press
(MODE) (*).
• "Metal" appears in the display when you insert a
metal or CrO
tape (Auto Metal function).
2
To
Press
Stop playback
(OFF)
(OPEN) then 6
Eject the cassette
6