TEFAL EXPRESS COMPACT ANTI-CALC GV7340 Manual Del Usuario página 15

Do not use any descaling
substances (vinegar, indus-
trial descaling products, etc.)
when rinsing the anti-scale
valve : they could damage it.
Before emptying your steam
generator, it must always be
left to cool for 2 hours to
avoid any risks of scalding.
The next time you use your iron, press the "OK" button on the control panel to turn off the orange "anti-
scale" light.
Storing your generator
A problem with your generator ?
PROBLEMS
The steam generator does not
switch on or the iron indicator and
ON/OFF indicator do not switch on.
Water runs out of the holes in the
soleplate.
Water streaks appear on the linen.
Easy descaling of your steam generator:
Operation:
Important: This operation must not be carried out unless the steam
generator has been unplugged for at least two hours and has cooled down
completely. To carry out this operation, the steam generator must be close
to a sink as water may come out of the tank when it is opened.
- fig. 10
- fig. 15
fig.7.
fig.8.
CAUSES
The appliance is not switched on.
Water has condensed in the pipes
because you are using steam for the
first time or you have not used it for
some time.
The soleplate is not hot enough.
Your ironing board is saturated with
water because it is not suitable for
use with a steam generator.
11
- fig.9.
- fig.11 fig.12
- fig.14
Check that your appliance is
correctly plugged in and press the
illuminated on/off switch.
Press on the steam control button
away from your ironing board until
the iron produces steam.
Wait for the thermostat light to go
out before activating the steam
button.
Check that your ironing board is
suitable. We recommend that you
use a mesh type ironing board.
- fig.13
SOLUTIONS
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
TR
EL
PL
CS
SK
HU
SL
RU
UK
HR
RO
ET
LT
LV