Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
S e t t i n g s
Display brightness
You can change the brightness of your phone display.
1. In the standby mode, select
brightness.
2. Scroll up or down to adjust the brightness level to your preference.
3. Select
OK
to accept your settings.
Backlight timeout
Backlight timeout sets the delay time before the display backlight is switched off.
In the standby mode, select
timeout
, and select a delay.
■ Tone settings
From this menu, you can adjust the ringing volume, keypad tones, and other tone
settings for the active profile. See "Customize a profile," p. 38, for more
information on profile settings.
Select
Menu
>
Settings
Incoming call
alert—Select how the device notifies you of an incoming call.
Ringing
tone—Select the ringing tone for incoming calls.
Ringing
volume—Set the volume of your ringing tone.
Vibrating
alert—Turn the vibrating alert
Message alert
tone—Select the tone for received messages.
Keypad
tones—Set the volume of your keypad tones (or turn them off).
Warning
tones—Turn warning and confirmation tones
Alert
for—Define which caller groups the selected profile will accept or decline.
■ Enhancement settings
The enhancement settings menu is shown only if the phone is or has been
connected to a compatible enhancement.
In the standby mode, select
44
Menu
>
Settings
Menu
>
Settings
>
Tone settings
and one of the following options:
On
Menu
>
Settings
>
Display settings
>
Display settings
or Off.
On
or Off.
>
Enhancement settings
>
Display
>
Backlight
> Charger.
Publicidad
Capítulos
Tabla de contenido
