Select A Base Station; Subscribing A Handset To A Base Station - Topcom Butler 575 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Butler 575

5.2 Select a base station

• Press the Function button until "SELECT BASE"
appears on the display.
• Press the OK button.
• The base number is shown on the display, for ex.
"BASE NO : 1".
• Press the Function button.
• The base numbers appear on the display
"BASE NO : 1 ~ 4, AUTO".
• When the desired base number is shown on the
display, for ex. "BASE NO : 2", press the OK
button.
• Let's assume that the handset was subscribed to
base unit 2 and that the handset number is now
"MULTI 1". If you want to subscribe this handset
to base unit 2 again, select de base unit
"BASE NO: 2" and press the OK button. Display :"NEW BASE:2"
Note : If the handset was never subscribed to base station 2,
the following is displayed : "NOT SUB2".
• On the display "BASE : 2" is shown.
• Press the OK button to subscribe the new base
s t a t i o n .
• The unit returns to idle mode, "MULTI 2" appears
on the display.

5.3 Subscribing a handset to a base station

To be able to make and receive telephone calls, the handset must be subscribed to
the base unit. A new handset can only be subscribed to the base unit when the
base unit is in subscription mode. Press and hold the Paging button for 15 secs until
you hear a beep tone. The base unit is now in subscription mode.
• Press the Function button until "H-REGISTER"
appears on the display.
• Press the OK button.
SELECT BASE
BASE NO: 1
BASE NO: 2
NEW BASE: 2
NOT SUB2
BASE: 2
H--REGISTER
12
MULTI 2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido