Butler 575
• On the display "SEARCH BS 1" is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is looking for the base unit,
the RFPI Code is displayed. Every base unit has its
own code.
• When "PIN : " is displayed, enter the PIN code of
the base unit.
• After entering the 4 digit PIN code, press the
OK button.
• The unit returns to the "H-REGISTER" menu.
5.4 Desubscribing a Handset
It is possible to terminate the subscription of a handset from the base unit. This is
done by entering the handset number.
• Press the Function button until "BASE SETTING"
is shown on the display.
• Press the OK button.
• Press the Function button until "HANDY DESUB"
is displayed.
• Press the OK button.
• The handset number appears on the display.
• Press the Function button and the handset
numbers from 2 to 5 are displayed.
• Press the OK button when the handset number,
that needs to be desubscribed, is shown on the
display, for ex. "HANDY NO : 2".
Note : You can desubscribe each handset except the one you are descubscribing with and "Multi 1".
For ex. handset number 3 (Multi 3) can't desubscribe handset number 1 (Multi 1) nor itself (Multi 3).
You can desubscribe the other handsets.
SEARCH BS 1
00004--00 :AB
PIN:
PIN: ++++
H--REGISTER
BASE SETTING
HANDY DESUB
HANDY NO:2
13