Installation; Symbols - Topcom Butler 575 Manual Del Usuario

Butler 575

1 INSTALLATION

• Open the battery cover of the handset and insert 3 AAA NiNH batteries
• Connect one end of the adaptor cable to the electric socket and the other end to
the adapter connection PWR (1) at the bottom of the Butler 575.
• Plug one end of the phone cable into the telephone line wall socket and the other
end into the TEL (2) connection at the bottom of the unit.
Charging the Handset Battery
To charge the battery, position the handset on the base unit. Before you use the
phone for the first time, charge the batteries for 24 hours. If the battery is charged
correctly, you should hear a beep sound when placing the handset on the base unit.
When the battery is almost empty, the battery symbol appears on the display.

2 SYMBOLS

The first line of the display ( 1 ) :
The first line of the display shows a maximum of 12 numbers or letters.
The second line of the display ( 2 ) :
On the second line of the display 6 symbols are displayed indicating the operation
status of handset.
4