Troubleshooting - Hamilton Beach 14567 Manual De Instrucciones

840154803 ENv01.qxd:Layout 1

Troubleshooting

PROBLEM
Iron won't heat.
Water is leaking.
Iron won't steam.
Iron leaves spots
on clothing.
Wrinkles not removed.
Iron too hot.
10
11/11/10 11:05 AM Page 10
PROBABLE CAUSE
• Is iron plugged in and the outlet working? Check outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a fabric setting?
• Is the Auto Shutoff Reset Button/Power Light illuminated? If not, push to reset.
• Do not overfill the water tank.
• If steam ironing, is the Adjustable Steam Control in a steam position that matches the
Temperature Control Dial steam range? Did the iron have enough time to preheat?
• If dry ironing, make sure the Adjustable Steam Control is in the
• Check water level.
• Is the Adjustable Steam Control in the
• Has the iron had enough time to preheat?
• ALWAYS empty water tank after using. Water left in tank may discolor clothing and soleplate.
• Check Temperature Control Dial is set to correct fabric.
• Check Temperature Control Dial and set to lower setting. Let iron cool down 5 minutes before
continuing.
(Dry Iron) position.
(Steam) position?