General Information - SATA dry jet 2 Instrucciones De Servicio

Content [Original Version: German]
1. General Information ............... 61
2. Safety Instructions ................. 62
3. Use ........................................ 62
4. Description ............................ 62
5. Scope of Delivery .................. 63
6. Technical Design ................... 63
7. Technical Data ....................... 63
Read first!
Read these operating instructions thoroughly and carefully before use.
Comply with the safety instructions and danger warnings!
Always make sure that these operating instructions are kept with the
product or keep them easily accessible for everyone at any time!

1. General Information

These operating instructions contain important information for operating
the SATA dry jet 2, hereinafter referred to as dry jet gun. They also de-
scribe use, care, maintenance, cleaning and troubleshooting.
1.1. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.2. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
1.3. Replacement, accessory and wear-and-tear parts
Always only use original SATA spare parts, accessories and wear parts.
Accessories not supplied by SATA have not been tested and approved.
SATA assumes no liability for damage caused by the use of non-approved
spare parts, accessories and wear parts.
Operating instructions SATA dry jet 2
8. First Use ................................ 63
9. Normal Operation .................. 64
10. Maintenance and Care .......... 66
11. Malfunctions .......................... 68
12. After Sale Service .................. 68
13. Spare Parts ........................... 68
EN
61