Troubleshooting - Saeco Royal SUP 016 E Manual Del Usuario

101
By means of keys , move the asterisk at
the end of the line on the menu item Descaling
and confirm the selection with the ENT key.
The following message will be displayed:
"DESCALING
Pour a discaling solution into the water tank
(according to the instructions on the product
package). Switch the machine on the programming
mode. Place a large container under the steam/
hot water spout and open slowly the steam knob.
The automatic descaling starts: Small amounts of
descaling solution are pumped into the circuit.
Then the pump stops to let the solution take effect.
During this phase, the following message is
displayed:
"MACHINE IS
"DESCALING
After approx. 45 minutes, when the procedure is
accomplished, the following message will be
displayed:
"DESCALING
"FINISHED
Close the steam knob. The pump stops.
Press ENT button. A display message reminds
you to rinse away any possible descaling residues
from the machine.
"RINSE MACHINE
Remove water tank, rinse it accurately and fill it
with fresh water. Turn the steam knob slowly on
and let all the contents come out. The following
message will be displayed:
"RINSING
"FINISHED
DESCALING
Close the steam knob. Go back to programming
function by pressing the ENT key.
Note: By pressing the ESC key (hot water key),
it is possible to quit descaling procedure.
"
Reset descaling message
In programming function, by pressing keys
move the asterisk till the end of the line on the menu
Sign. Descal and confirm the selection with
ENT button.
The following message will be displayed:
"RESET DESCALING
"NO
By means of the same keys , it is possible
to modify the value; Yes or no.
Through this reset operation, the internal counters
"
of the two water systems are reset and the
"
message DESCALE is erased.
If the function
"SIGN. DESCAL.
is selected without the displayed message
"
" Descale, the following message will be
displayed:
"QUANTITY WATER
"NOT REACHED
Standard descaling
Switch off the machine. Pour a descaling solution
"
into the water tank (according to the instructions
on the product package). Place a large container
under the steam/hot water spout (7). Switch the
machine on by pressing the main switch, press
the hot water key and let the descaling solution
in the water tank pour out of the spout for 1 minute
approx.
"
"
Press hot water key to complete the operation.
102
Switch the machine off and let the solution taking
effect for 5 minutes approx. Repeat this procedu-
re two or three times, to empty the water tank.
As soon as descaling has been performed, rinse
the water tank (11) thoroughly and fill it with fresh
water.
, Switch on the machine again and let water (2
l approx.) flow out of the steam/hot water
dispensing tube in order to rinse away residues.
Important:
A periodic descaling ensures a correct machine
"
functioning and avoids expensive repairs. The
"
machine warranty does not cover damages
occurring as a result of the non-observance of
descaling procedures, improper use and non-
observance of any other instruction contained
herein. Maintain the manufacturer's adjustment if
the water hardness degree is not known.
Disposal
Machines which are no longer operational
"
should immediately be made non serviceable,
by cutting the power cord. Machines should be
delivered to a public disposal centre.
Switch off and unplug the machine if it will not be
used for long periods.
Cut the supply power cord and deliver the
"
" machine to a public collecting point.
Should the machine not be used anymore,
switch it off and unplug it.
Keep the machine in a dry place, far from the
reach of children.
Should the machine not be used for a long
period, keep it from dust and dirt
DESCALING
Maintenance
Periodically check the machine working and
clean it in accordance to the instructions.

Troubleshooting

In case of failure, fault or suspected damage
following a fall, unplug the machine immediately.
To fix problems, follow the instructions in the
table. Otherwise contact authorised personnel.
Only skilled personnel are authorised to repair
the machine. The user might incur serious injuries
should repairs not be properly carried out.
The manufacturer declines any liability
whatsoever, should repairs fail to be carried out
according to the instructions contained in this
manual: Furthermore in these cases warranty
rights cannot be honored.