Stanley FATMAX FMEG210 Manual Del Usuario página 9

Fitting
Removing
tool to operate at high speed. Grinding rate is greatest
Once a cut is begun and a notch is established in the
Warning!
available from your Stanley Fat Max dealer as an accessory.
the disc is clamped tightly.
the tool operates at high speed.
Using sanding backing pads
Precautions to take when sanding paint
(Original instructions)
application. Sanding discs are available in various grits.
Coarse grits yield faster material removal rates and a rougher
Coarse = 16 - 30 grit.
Fine Finishing = 100 - 120 grit.
to operate at high speed. Sanding rate is greatest
Move the tool constantly in a straight line to prevent
Sanding of lead based paint is NOT RECOMMENDED
clean up is completed.
Note:
paint dust and fumes should be used. Ordinary painting
ENGLISH
9