English
When on a call using the built-in audio receiver in the unit, hold the unit
pointed down toward your shoulder to increase separation from the
antenna. For body-worn operation, keep the HandlePlus 326i gsm at least
2.2cm (0.87 inch) away from the body, and only use carrying cases, belt
clips, or holders that do not have metal parts and that maintain at least
2.2cm (0.87 inch) separation between HandlePlus 326i gsm and the body.
If you are still concerned about exposure to RF energy, you can further
limit your exposure by limiting the amount of time using the HandlePlus
326i gsm, since time is a factor in how much exposure a person
receives, and by placing more distance between your body and the
unit, since exposure level drops off dramatically with distance.
Hearing Aid Compatibility
The Hearing Aid Compatibility Act of 1988 and FCC regulations
promulgated under the Act provide minimum requirements for hearing
aid compatibility for wireless GSM phones sold in the United States.
FCC regulations require that beginning June 6, 2008, each handset
manufacturer that distributes more than two models of cellular
telephones in the United States must meet at least an "M3" rating (as
set forth in set forth in American National Standard Institute (ANSI)
standard C63.19) for one third of the handsets that it offers to service
providers per digital air interface. For inductive coupling, each handset
manufacturer must offer to service providers at least two "T3"-rated
handset models per digital air interface.
The HandlePlus 326i gsm is not hearing aid compatible under the ANSI
standard or FCC regulations and may cause interference with some
hearing aid equipment. Doro AB, manufacturer of this unit, is exempt
from the FCC's hearing aid compatibility regulations at this time.
Using the Doro HearPlus eh346m EarHook can eliminate this for
hearing aids with a "T" position. If any other interference occurs,
please contact your operator.
FCC ID: WS5DORO326328G