Storing A Redial Number; Inserting A Pause In The Dialing Sequence; Reviewing , Changing Or; Stored Numbers - GE 27939 Guia Del Usuario

7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
S R
TORING A EDIAL
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Press any number key (0-9) to store the phone number in that memory location.
I P
NSERTING A
Press the #PAUSE button on the number pad twice to insert a delay in dialing
sequence of a stored telephone number when a pause is needed to wait for a
dial tone (for example, after you dial 9 for an outside line, or wait for a
computer access tone.) Each pause counts as 1 digit in the dialing sequence.
R , C
EVIEWING HANGING OR
To Review: press memory, then press the CID (up or down arrow) buttons
(or memory location number) to scroll through the stored numbers.
To Change: Use the same procedure to change a stored number as you do
to store a number and just replace one stored phone number with a
different one.
To Delete: Press mem, then press the CID (arrow up or down) buttons to
scroll to a desired entry.
1. While the entry is displayed, press redial/delete to mark the entry for
deletion. The display shows DELETE?
2. Press redial/delete a second time to delete the entry. DELETED is displayed.
NOTE: If you don't want to change or delete a number, simply press the
cancel button or wait for 1 minute to exit Review mode.
D S
IALING A TORED
Handset:
Make sure the phone is ON by pressing the TALK/callback button.
N
UMBER
D
AUSE IN THE
D
N
UMBER
S
IALING EQUENCE
S
ELETING TORED
N
UMBERS
23