INSTALLATION—RECIRCULATING
10
INSTALL FILTERS
the hood. These channels will hold the charcoal filters
and stainless steel grease filters in place.
Install charcoal filters
forward until it rests in the front upper channel.
Install grease filters
forward until the filter rests on the channel.
engage the switch arm.
9
FINALIZE INSTALLATION
on the front face of the hood and any other packaging
materials.
installed and the filter light is not on.
31-10725 Rev. 6
Installation Instructions
Upper charcoal
filter channel
Lower charcoal
filter channel
Upper charcoal
filter channel
Grasp tab,
lift and pull forward
Lower
filter channel
Owner's Manual for operating instructions and the
21