Disposal - Brill Vl 38 B Manual Del Usuario

Maintenance and care
Care of the engine
Air filter
Spark plug
Oil change
Drain used oil when the motor is warm.
Warm oil drains quickly and completely.
1. To collect oil, place a suitable container under
the engine.
2. Remove the oil dipstick.
3. Screw in the filler neck.
4. Push the beam downwards and tilt the equip-
ment, until the beam touches the floor. Drain
the oil completely.
5. Pull the equipment up and fill with oil (SAE
10W-30, quantity: 0,25l)
6. Remove the filler neck.
7. Screw in the oil dipstick.
Dispose of used engine oil in a manner
that is compatible with the environment!
We recommend to collect the used oil in
a closed container and to deliver it to a
suitable recycling or service station.
Used oil should not be
disposed of with domestic rubbish
poured into the sewage water sys-
tem or drain pipes
poured on the ground
440162_b
Observe the operating instructions supplied by
the engine manufacturer.
Storage
CAUTION!
Do not store motor near open flames or
heating sources - Burn and/or explosion
danger!
Let the engine cool down.
Store the scarifier in a dry place.
To save storage space, unscrew the butterfly
nuts on the beam and fold it in.

DISPOSAL

Do not dispose of worn-out machines
or spent batteries (including recharge-
able batteries) in domestic waste!
The packaging, machine and accessories
are made from recyclable materials and
must be disposed of accordingly.
15