Technical Notes; Important - Bell & Ross BR-X1 CHRONOGRAPH TOURBILLON Noticia Técnica

Te c h n i c a l N o t e s
BR-X1 CHRONOGRAPH TOURBILLON
GENERAL DESCRIPTION
Movement: hand-wound mechanical. BR-CAL.283. 35 jewels. 21,600 vibra-
tions per hour. 4-day power reserve. High precision setting to 4 positions
(tolerance of 0/+10 seconds per day).
Monopusher column wheel chronograph: 30-min. counter and 60-sec.
counter. Power reserve indicator. Flying tourbillon.
eter. Screw-down crown.
GENERAL USAGE
To unscrew the crown in position 0, rotate it anticlockwise.
When the watch has stopped , unscrew and pull the
Starting the watch.
crown out to position 1 and wind the movement by rotating the crown
clockwise until the power reserve indicator hand points to the top of the
scale. The power reserve is 4 days when fully wound.
the crown out to position 2. Set the time by rotating the crown clockwise.
A
B
C
D
E
F
G
A. Minute hand
Chronograph second counter
B.
C. Chronograph minute counter
D. Hour hand
Power reserve indicator
E.
F. Attachment screw
(NEVER UNSCREW)
Tourbillon cage
G.
H. Crown
Pusher I. Start/Stop/Reset
I.
Unscrew the crown (rotate anticlockwise)
0.
1. Wind the movement manually (rotate clockwise)
Set the time (rotate in either direction)
2.
Functions: hours and minutes.
Case: 45 mm in diam-
Setting the time. Pull
I
0 1 2
H
USING THE CHRONOGRAPH
The Chronograph Function Can Measure Time In Minutes And Seconds.
Using The Pusher I:
1 Press: Sets Off The Time Measurement.
St
2 Press: Stops The Time Measurement.
Nd
3 Rd Press: Stops And Resets The Chronograph.

IMPORTANT

Magnetic fields. Magnetic fields can adversely affect the accuracy of your
watch. Also, we would recommend that you avoid placing your watch near
electronic devices that may generate large magnetic fields (radio, smart-
phone, television, computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resist-
ance, push the crown back to position 0. Never operate the crown under-
water.
Note: The 4 slotted screws (F) mount the bezel to the case and ensure the
water resistance of the watch. To benefit from the Bell & Ross warranty,
these screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse
off the watch and strap with fresh water. It is also recommended to have
the water resistance of your watch checked every two years. To ensure a
service that meets the brand's exacting standards, any servicing of your
watch must be carried out by the Bell & Ross service centre or a watch-
maker approved by Bell & Ross. Whenever repairs are made during the
warranty period, you must present the Bell & Ross warranty card, duly
dated and signed by the retailer at the time the watch was purchased.
We thank you for the confidence that you have shown in our
brand and we hope that your Bell & Ross watch meets with
your complete satisfaction.
The Bell & Ross international guarantee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making
industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the
Bell & Ross approved retailer on the international guarantee certificate subject to applicable laws and/or legal
guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing,
brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an
approved after-sales service center.
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific
nature of these items.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by
approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly
completed, dated and signed by an approved retailer.
Models and Technical features subject to change
© Bell & Ross 07/2015