Nice Robus 600 Manual Del Usuario página 21

Ocultar thumbs Ver también para Robus 600:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
OTHERS:
GATE
BLOCK AUTOMATION
MEMORY
BUS
STAND-BY
OTHER DEVICES:
COURTESY LIGHT
SUCTION CUP
LOCK
MAINTENANCE
mode
This function enables programming of the type, and method of managing the control unit maintenance phase. There are two
application modes:
J automatic – When this mode is set, the "partial counter" (number of manoeuvres completed after maintenance) is updat-
ed automatically according to the duration of the manoeuvres performed and the force applied on the motor;
J manual – When this mode is set, the "partial count" is updated according to the number of manoeuvres performed.
manual alarm threshold
A value from 0 to 16777215 (manoeuvres) can be assigned to this parameter; if the mode is set to manual, the factory setting
of the parameter is 10000 (manoeuvres).
This function enables programming of a reference limit, over which automation maintenance is required.
partial count
This function enables the user to check the number of manoeuvres performed by an automation since the last maintenance pro-
cedure on the latter.
delete maintenance
This parameter type is ON / OFF; the factory setting is "OFF". This function enables deletion of the "partial count" value; this is
required after performing maintenance on the automation.
Indicates the operating status of the application.
Indicates when the automation is blocked following a "Block" com-
mand.
Indicates a problem regarding the data related to bluebus devices,
memorised in the control unit.
Indicates whether there is a short circuit on the bluebus output.
Indicates when the control unit is in standby status.
Indicates whether the control device is present, the relative operating
status and whether it is memorised correctly in the control unit.
Indicates whether the control device is present, the relative operating
status and whether it is memorised correctly in the control unit.
Indicates whether the control device is present, the relative operating
status and whether it is memorised correctly in the control unit.
Robus 600-1000 – 21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Robus 1000

Tabla de contenido