Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En; Product Description - Abicor Binzel BRS-CCi Instructivo De Servicio

BRS-CCi

1 Identification

The cleaning station BRS-CCi is used in industry and in the trade for automatic cleaning of the gas nozzle
interior of MIG/MAG welding torches. The BRS-CCi serves as a preventive measure to extend the service
lives of the torches and the maintenance intervals. The frame construction consists of cast aluminum which
includes the pneumatic valves. These operating instructions only describe the cleaning station BRS-CCi. The
cleaning station BRS-CCi may only be operated using original ABICOR BINZEL spare parts.
1.1 EU Declaration of Conformity
according to the EC Directive 06/42/EC (machines),
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG, Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction, the present product described in these
operating instructions complies with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1
1.2 Responsibilities of the User
Within the EEA (European Economic Area) the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially Directive
(89/655/EEC) concerning the minimum safety and health requirements for the use of work equipment by
workers at work must be adhered to. In Germany, the Job Protection Law and the Company Safety
Ordinance must be heeded. In addition, the operator must ensure that the product in combination with
welding devices complies with the EC EMC Directive (2004/108/EC) and that the signal utilization of the
integrated welding current monitoring against stray currents is installed properly.

2 Product Description

2.1 Designated Use

The cleaning station BRS-CCi is designed for automatic use. The cleaning station forms part of the welding
system and may only be operated in it. Designated use also includes the observance of the prescribed
operating, maintenance and servicing conditions.

2.2 Use contrary to the designated use

Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorized conversions or power increase modifications are not allowed.
EU Declaration of Conformity
Cleaning station BRS-CCi
06/42/EC machines
DIN EN ISO 12 100
1 Identification
EN - 3