Installation; Operation; Maintenance/Cleaning; Important Information On Eco - Vortice REGOLATORE THERMOLOGIKA SOLEIL PLUS Manual De Instrucciones

ENGLISH
• Do not use the regulator for electric motors or
transformers.
• Any use other than as stated in this instructions
handbook can damage RTSP, besides causing
short-circuiting and fires.
• Specifications for
correspond to the electrical data on data plate A (fig.
3).
• Do not cover or obstruct the regulator during

operation.

• Do not use the regulator near a bath, shower or
swimming pool and in any case, for its installation,
keep to the requirements of the law on appliances
with water protection class IP20.
• Do not use RTSP if the power cable is damaged.
Cable renewal must be performed by professionally
qualified personnel. Use a cable with T90
characteristics.
• The regulator has been designed solely for use in
closed rooms.
• The regulator must be installed in a dry place.
Industrial installations require observance of the
safety regulations in force in the country of

installation.

• Pay special attention when using it in rooms that are
not manned.
• The appliance's safety guard has been specially
designed to prevent direct access to the heater
elements; this guard must be kept in position at all
times during operation.
Installation
RTSP must always be secured, with screws and
plugs, on vertical walls and on non-flammable and/or
indeformable surfaces (e.g., tiled walls).
The controller must be positioned at a distance of not
less than 2 m from objects made of flammable
materials, such as cardboard or fabric, and from glass
doors and windows.
The regulator must not be fitted inside containers or
cabinets because a lack of ventilation would damage
it.
The dissipator heats up during operation; fitting the
regulator in contact with flammable surfaces is a fire
hazard.
If installation on wooden, laminate or wallpapered
walls is required, it is necessary to leave a gap of at
least 10 mm between the dissipator and the wall to
ensure proper ventilation.
Operation
Make sure the switch is turned onto 0 (OFF). (fig. 2b)
Connect the slave appliance to the Schuko socket on
the regulator (fig. 2a).
Regulate the potentiometer according to the desired
power (from MIN to MAX) (fig. 2c).
A slight buzzing noise is normal during operation.
WARNING: Do not use extensions or cables to
connect the regulator to the power mains; use the
cable and plug supplied. Always connect the
regulator to sockets with grounding.
8
the power supply

Maintenance/Cleaning

RTSP is maintenance free. It must be cleaned from
time to time with a dry antistatic cloth.
WARNING: Before doing any cleaning, switch off
must
the appliance and unplug it from the power supply.
Do not use any liquids for cleaning. Do not use any
sharp tools for cleaning (e.g., screwdrivers, files,
brushes, etc.)

Important information on eco-

compatible disposal

IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN THESE
COUNTRIES THE PRODUCT IS NOT SUBJECT TO
SEPARATE DISPOSAL OPERATIONS AT THE END
OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol of
the barred waste bin. This indicates
that, at the end of its useful life, it
must not be disposed of as
domestic waste, but must be taken
to a collection centre for waste
electrical and electronic equipment,
or returned to a retailer on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the end
of its useful life. Failure to do so may incur
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related
healthrisks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities
for recycling, processing and environmentally
compatible disposal either directly or by participating
in collective systems.

Technical data

Operating voltage: 230V~50Hz
Maximum slave power: 3000W
Field of regulation: 30% - 100%
Working temperature: 0°C – 40°C
Protection class: IP20
Insulation class: II
NOT FALL WITHIN THE
the