Locations Of Controls; Getting Started - SOUNDMASTER UR106 Manual Del Usuario

MEM/M+ / SET button
1
2
BACKWARD button
FORWARD button
3
SNOOZE button / SLEEP button /
4
DIMMER button / DISPLAY ON/OFF
button
ALARM 1 button / VOL DOWN button /
5
ALARM OFF button
ALARM 2 button / VOL UP button /
6
ALARM OFF button
7 button / ALARM OFF button
8 Display
9 Alarm 1 indicator (Buzzer)
10 Alarm 1 indicator (Radio)
11 Alarm 2 indicator (Buzzer)
12 Alarm 2 indicator (Radio)
13 Speaker
14 Battery compartment
15 Antenna
16 Power cord
Connecting to power
• Connect the power cord to a wall socket (AC 230V ~ 50Hz).
• The radio is powered and in standby mode when you see the display is switched on.
Backup system
• The radio is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032
not included). Insert the battery into the battery compartment and make sure the positive and
negative (+ or -) sides of the battery are in contact with the corresponding terminals in the
battery compartment.
• If a power cut occurs, the radio automatically switches to the battery power supply and
keeps the clock and timer settings.
• To open the battery compartment, use a screwdriver to detach the screw on the
compartment door.
• When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and
alarm settings will be lost.

LOCATIONS OF CONTROLS

Getting started

1
UR106 / English Instruction Manual