Kärcher KSM 690 BAT Manual De Instrucciones página 10

ENGLISH
Maintenance work
During cleaning and maintenance
of the unit and when replacing
parts, the (–) pole of the battery
must be disconnected. Do not tilt
the unit; Danger of battery acid
running out.
- An appropriate testing procedure for the unit
should be carried out by Kärcher or by a
qualified person at least once annually, e.g.
for damage, seal tightness, function of the
control devices.
Maintenance Schedule KSM 690 BAT / KSM 690 Profi
Daily
1 Sweeping roller
2 Dust filter
Every 40 operating hours
3 Battery,
low-maintenance
4 Brushing lip and side
skirts
5 Belt
6 Sweeping roller
Every 500 operating hours
7 Electric motor
10
check for tape, rope, etc. which
may have become caught
check for damage
check fluid level
check for damage
check for damage
Check for wear
check carbon brushes for signs
of wear
Technical Data
Nominal voltage ...................................... 12 V
Nominal current ...................................... 26 A
Output .................................................. 300 W
Degree of protection .............................. IP 24
Length x width x height1200 x 770 x 925 mm
Weight .................................................... 51 kg
Travelling and brushing speed ........... 4 km/h
Area capacity with side brush ..... 2800 m
Volumetric air flow ................................ 43 l/s
Low air pressure ............................... 7 mbar
Brushing width with side brush ....... 710 mm
Brushing width without side brush . 470 mm
Dirt container capacity ..................... 25 (60) l
Filter area ................................................. 1 m
Application category ................................. "U"
Permitted gradient ........................ max. 15 %
Ambient conditions:
Temperature .............................. –5 to +40 °C
Air humidity, not wet with dew ........ 0–90 %
Noise emission
Sound level (EN 60704-1)
Guaranteed noise level
(2000/14/EC) .................................... 85 dB(A)
Machine vibration
Rated vibration value
(ISO 5349) ...................................... < 2,5 m/s²
2
/h
2
69 dB(A)
..........................