Kärcher KSM 690 BAT Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
ENGLISH
12
B Pull the drive lever. Unit moves forward.
Note: When first using the unit after unpacking and assembly,
pull drive lever slowly and observe starting speed.
– The more the drive lever is pulled back, the faster the
forward motion of the unit.
– To stop, release the drive lever. When negotiating turns,
slowly release the drive lever to reduce unit speed and
required steering effort.
– If the needle of the battery charge indicator drops below the
green zone, the battery is discharged. At this point, continuing
operation would deep-discharge the battery. Recharge the
battery immediately.
Note: It is only possible to get a correct reading from the
battery display approx. 45-60 s after the unit has been
switched on.
Caution: Deep-discharging the battery will lead to a
significant permanent loss in battery storage capacity.
3. Connecting the side brush
A Raise the foot pedal – the side brush engages.
Press the foot pedal – the side brush disengages.
Note: Only use the side brush when required (edges,
kerbs, etc.) as the unit does not remove dust swirled up by
the side brush.
4. Shaking the filter, emptying the tank
Note: Do not shake the filter or empty the tank in enclosed
areas (effect of dust!)
– Switch off the unit.
A Always shake the filter several times before
emptying the refuse tank.
B Remove the refuse tank and empty.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ksm 690 profi1.978-1081.978-102

Tabla de contenido