Gateway
❖
•
192.168.0.1 [Example]
This IP address must be the IP address of your router
(private or LAN side).
Use the same Default Gateway you noted under
"Current TCP/IP Settings".
DNS Server
❖
•
Use the 1st DNS Server from "Assigned IP Address
from My ISP".
If you did not receive any IP addresses from your ISP,
please contact them and acquire the IP address of their
DNS server.
HTTP Webserver port
❖
•
10080
Do NOT use the default port 80, you must change this
number.
You may select any number between 80,
10000 ~ 60000.
Device port (TCP)
❖
•
60001
You may select any number between
10000 ~ 60000, 60001.
TCP Streaming port
❖
•
60002
You may select any number between
10000 ~ 60000, 60002.
uDP Streaming port
❖
•
60003
You may select any number between
10000 ~ 60000, 60003.
upload port(TCP)
❖
•
60004
You may select any number between
10000 ~ 60000, 60004.
Network Setup
CaSe b : STaTIC(FIxeD) IP +
PerSONal rOuTer [eFFICIeNT]
Configure your IP Smart Dome's TCP/IP properties as
follows :
IP Type
❖
•
STATIC
IP address
❖
•
A private IP address such as 192.168.0.202
[Example]
You need to assign the IP Smart Dome an IP address,
just as you would assign a PC.
The IP address you assign must be unique to your
network as well as match your network.
The IP address you assign the IP Smart Dome must be
a private IP.
Subnet Mask
❖
•
255.255.255.0 [Example]
You must use the same subnet mask as the one you
noted under "Current TCP/IP Settings"
Gateway
❖
•
192.168.0.1 [Example]
This IP address must be the IP address of your router
(private or LAN side)
Use the same Default Gateway you noted under
"Current TCP/IP Settings"
DNS Server
❖
•
Use the 1st DNS Server from "Assigned IP Address
from My ISP"
If you did not receive any IP addresses from your ISP,
please contact them and acquire the IP address of their
DNS server.
English –