Camera Setup - Samsung SNC-C7478 Manual Del Usuario

How to use OSD Menu
CaMera SeTuP
Setup the general functions of zoom camera module
ZOOM CAMERA SETUP
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
FLICKERLESS
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
• Focus Mode [AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
 SEMIAUTO Mode
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus
mode. Manual Focus mode activates in preset
operation and Auto Focus mode activates when jog
operation starts.
With Manual mode at presets, Focus data is
memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset.
• Digital Zoom [ON/OFF]
Sets digital zoom function to ON/OFF. If this is set to
OFF, optical zoom function runs but zoom function
stops at the end of optical zoom magnification.
• Image Flip [ON/OFF]
To display Upside down image.
• Flickerless [ON/OFF]
Turn on or off the Flickerless function. In this function,
AE mode becomes Shutter Priority mode and shutter
speed value will be fixed to 1/100 sec.
8 – 36x IP Smart Dome Camera
SEMIAUTO
ON
OFF
OFF
White balance Setup
❖
WB SETUP - GLOBAL
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
• WB Mode [AUTO/MANUAL]
In Manual mode, Red and Blue level can be set up
manually
• Red Adjust [0~255]
• Blue Adjust [0~255]
auto exposure Setup
❖
AE SETUP
WDR/BLC
DAY/NIGHT
AE MODE
 IRIS LEVEL
 GAIN LEVEL
 SHUTTER SPD
 BRIGHTNESS
BACK
EXIT
• WDR/BLC [ ALL OFF / WDR ON / BLC ON ]
Select WDR(Wide Dynamic Range) or BLC(Backlight
Compensation) function. All OFF means turning off
both functions.
• Day/Night [AUTO/DAY/NIGHT]
AUTO exchanges Day / Night
• AE MODE [AUTO / MANUAL / IRIS / SHUTTER
/ BRIGHT]
auTO: Full Auto mode for AE function
MaNual: In manual mode. IRIS, GAIN, SHUTTER
SPEED can be changed in this mode.
IrIS: Iris priority mode. You can change IRIS while
others are adjusted automatically.
SHuTTer: Shutter priority mode. Shutter speed can
be changed while others are adjusted automatically.
brIGHTNeSS: In this mode, you can assign AE
value in terms of Brightness.
AUTO
---
---
ALL OFF
AUTO
AUTO
---
---
---
---