Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
This section is provided to familiarize the user with the
setup tools. Intuitive options are not explained in detail.
All the changes on Setup Tools take effect immediately.
These settings will be global, affecting the view of all
users currently logged on.
All settings are always saved in the IP Smart Dome
Camera even when you close the viewer program or you
turn off the Power of the IP Smart Dome Camera. If you
lost your password, you must press the reset button to
return all setting to its factory defaults.
VIDeO & auDIO
CONFIGuraTION
resolution
❖
•
Select a video size from D1, VGA and CIF.
NTSC : D1(720x480), VGA(640x480), CIF(352x240)
PAL : D1(720x576), VGA(640x480), CIF(352x288)
Quality
❖
•
Select a video quality level between 1 and 10.
Frame rate
❖
•
Select a frame rate.
NTSC : 30fps, 15fps, 8fps, 3fps, 1fps
audio Input Gain
❖
•
Select the audio amplification level between 0 and
10.
(* You will not be able to hear the audio data if the
audio input gain is at zero.)
Setup Tool
IP
IP Type
❖
•
Select the IP setting type from <Static IP>,
<Dynamic IP> or <PPPoE IP>
MaC address
❖
•
Shows the Ethernet MAC Address. Since this value
is used to create a DDNS address, confirm the
value.
IP address
❖
•
Shows the currently configured IP address. If the
<IP Type> is set to <Static IP>, you can change the
IP address.
Subnet Mask
❖
•
Show the <Subnet Mask> address for the
configured IP address.
Gateway
❖
•
Show the <Gateway> address for the configured
IP address.
DNS Server
❖
•
Shows the IP address of the DNS(Domain Name
Service) server.
HTTP Webserver Port
❖
•
Show the HTTP port used to connect to the
English – 1
Publicidad
Capítulos
Tabla de contenido
