Function Setup - Samsung SNC-C7478 Manual Del Usuario

How to use OSD Menu
Parking action Setup
❖
PARKING ACTION SETUP
PARK ENABLE
WAIT TIME
PARK ACTION
BACK
EXIT
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned "WAIT TIME".
• Park Enable
• Wait Time
The time is displayed with "hh:mm:ss" format and
you can change this by 1 sec unit.
• Park Action
[HOME/PRESET/PATTERN/AUTOPAN/SCAN]
Ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned "WAIT TIME."
FuNCTION SeTuP

FUNCTION SETUP

<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Configure 5 Special Functions with this menu
• Preset Setup
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.
• Auto Pan Setup
Up to 8 Auto Pans are available, which makes camera
to move slowly between two preset points.
• Pattern Setup
Up to 4 patterns can be stored in the dome.
In this function, path data created by manual move
 – 36x IP Smart Dome Camera
OFF
00:10:00
HOME
[ON/OFF]
[5 sec ~ 4 hour]
of Joystick are recorded and you can playback the
identical path automatically whenever required.
• Scan Setup
Up to 8 Scans can be defined.
In a Scan, max 20 entities are assigned from any
combinations of Preset/Auto Pan/Pattern. If you run a
Scan, camera will execute each entry sequentially.
• Schedule Setup
7 rules of Schedule can be assigned by day and time.
Appropriate actions (such as Home, Preset, Auto Pan,
Pattern and Scan) can be defined for each rule. Also,
it is possible to use Weekday and Weekend in a rule
to make it simple.