Tunturi Cross sprinter Manual De Instrucciones página 8

Step 5: Height adjustment screws & End caps
1. Tilt the elliptical to one side and put something under
the unit for support and install the three height adjust-
ment screws (65) for that side. Tilt the unit to the other
side and install those three height adjustment screws
(65). Level the elliptical once it is positioned where it
will be used. Screw the two middleheight adjustment
screws all the way in and the front and rear levelers
all the way in, then back them out about two or three
turns. Level the unit using only the front and rear ad-
justment screws first, then adjust the middle adjustment
screws so they touch the floor. Make sure to lock the
adjustment screws when finished.
5.
English
8
2. Press the six plastic end caps (72) into the oval stabi-
lizer tubes.